ALNICO AL-6160Sx
|Datasheet
16 bays 3U Rackmount SAS to SATA-II RAID Subsystem
AL-6160Sx RAID subsystem comes in modular, cable-less, highest-density 3U chassis. The RAID controller uses high performance Intel IOP processor along with intelligent cache system, which supports up to 4GB DDR-II SDRAM. With advanced algorithms to provide RAID levels: 0, 1, 3, 5, 0+1, 6 and JBOD as your option, so you can benefit either performance or availability.

AL-6160Sx adopts two miniSAS connectors for SAS HBA connection and SATA-I/II backplane for the drive connection. Depending on necessities, the customers can select AL-610Sx to take the place of Ultra320 SCSI interface-based Alnico RAID subsystem models for the ultimate in performance and fully usage of high bandwidth coming from SAS technology.

The already released AL-6160Sx perfromance testing chart shows Alnico 6 SAS RAID greatly enhances the data transfer rate 30~40% while being compared with Ultra320 SCSI interface-based Alnico RAID subsystem models. In today's industry, SATA-I/II drives are still the preference over SAS drives for the reasons that they are much more less expensive in the cost of per megabyte. Under this context, we designed the new model for Alnico RAID subsystem 6 Series in the hope that the customers can have more varied chioces, and the chance to enjoy the high stability and bandwidth of SAS technology with less cost.

Highlights
  • Dual miniSAS connectors ( 3Gb x 2 Links per connector) ; the through-put can easily approach to 280MBps.
  • Utilizes 16 the newest SATA-II (3Gpbs) hard disks; easily builds a TB RAID with less compatible problems
  • Perfect data protection with RAID 6 configuration
  • Up to 4GB DDR-II SDRAM on one DIMM socket with ECC protection
  • Redundant and hot-swappable power supply modules and cooling systems can tolerate a main failure without interrupting service.
  • Web Browser-based RAID manager (on-board Ethernet supported) brings the most convenient way to configure and monitor RAID subsystem.
Technical Specifications
RAID Architecture
Intel IOP348 processor
Support extreme performance RAID 6 function
Up to 4GB DDR-II SDRAM on one DIMM socket with ECC protection
Advanced PCI-X & PCIe bus architecture
RAID operation
RAID Levels: 0, 1, 3, 5, 0+1, 6 & JBOD
Multiple RAID selection
Online RAID level/stripe size migration
Online Array roaming
Online capacity expansion and RAID level migration simultaneously
Instant availability and background initialization
Automatic drive insertion / removal detection and rebuilding
Host Interface
Two miniSAS connectors - 3Gb SAS port x 2 Links per connector
Drive Interface
16 of SATA –II channel - 3.0Gbps per channel
RAID Management
Field-upgradeable firmware in flash ROM
Firmware-embedded SMTP manager monitors all system events and user can select either single or multiple user alerts to be sent via e-mails
Firmware-embedded Web Browser-based RAID manager via 10/100 Ethernet port
Monitors/Indicators
LCD control panel for setup, alarm mute and configuration
System status indication through LCD, LED and alarm buzzer
All system events can be sent to multiple user alerts via e-mails
Firmware-embedded SNMP agent permits the remote to monitor all events through LAN with no SNMP agent required
Environmental /Physical
Cooling
Two redundant, hot-swappable cooling modules with self-regulating speeds and wide range airflow design
Controlled by RAID controller automatically maintaining optimal ambient temperature
Electrical
Redundant by dual 460W power supplies with PFC, load-sharing type, hot-swappable and cable-less design
AC Voltage 110-230 VAC /AC Frequency 50-60Hz
Temperature
Operating temperature: 5 to 35 degree C
Non-operating temperature: -40 to 60 degree C
Relative Humidity
20% to 80% non-condensing
Size and weight
Dimensions: 446mm(W) x 470mm(D) x 3U
Weight (w/o HDDs): 18.0kg

  Copyright | Contact us