| Intel IOP348 processor |
| Support extreme performance RAID 6
function |
| Up to 4GB
DDR-II SDRAM on one DIMM socket with ECC
protection |
| Advanced
PCI-X & PCIe bus architecture |
| RAID Levels:
0, 1, 3, 5, 0+1, 6 & JBOD |
| Multiple RAID
selection |
| Online RAID
level/stripe size migration |
| Online Array
roaming |
| Online
capacity expansion and RAID level migration
simultaneously |
| Instant
availability and background initialization |
| Automatic
drive insertion / removal detection and
rebuilding |
| Two 4Gb FC-AL (SFP)
|
| 8 of SATA
¡VII channel - 3.0Gbps per channel |
| LCD control
panel for setup, alarm mute and
configuration |
| System status
indication through LCD, LED and alarm buzzer |
| All system
events can be sent to multiple user alerts via
e-mails |
| Firmware-embedded SNMP agent permits the
remote to monitor all events through LAN with no
SNMP agent required |
| Two
redundant, quickly-swappable cooling fans with
self-regulating speeds and wide range airflow
design |
| Controlled by
RAID controller automatically maintaining optimal
ambient temperature |
| Redundant by
dual 375W power supplies with PFC, load-sharing
type, hot-swappable and cable-less design |
| AC Voltage
110-230 VAC /AC Frequency 50-60Hz |
| Operating
temperature: 5 to 35 degree C |
| Non-operating
temperature: -40 to 60 degree C |
| 20% to 80%
non-condensing |
| Dimensions:
446mm(W) x 480mm(D) x 2U |
| n Weight (w/o
HDDs):
13.0kg |
AL-6080Fx utilizes two 4Gb FC-AL (SFP) as host
interface to connect SAN Environments; the through-put can very easily
reach 650 MB/sec. And new generation of SATA-II is utilized in
our design as the disk interface. Therefore, you can very
simply build a TB RAID with less compatible problems with
total 8 of SATA disk drives. Redundant and hot swappable power
supply modules and cooling fan systems can tolerate a main
failure without interrupting service. And web configuration
(on board Ethernet supported) brings you a most convenient way
to configure and monitor our RAID subsystems.
