| PowerPC 400SP
processor |
| Proprietary PCI-X 2.0 Polynomial ASIC to support extreme performance RAID 6
function |
| Up to 4GB DDRII 667Mhz
memory on one DIMM socket with ECC protection |
| Advanced 133Mhz/ 64-bit PCI-X buses
architecture |
| NVRAM and Real Time Clock supported |
| RAID Levels: 0, 1, 3,
5, 0+1, 6 & JBOD |
| Multiple RAID
selection |
| Online RAID
level/stripe size migration |
| Online Array
roaming |
| Online capacity
expansion and RAID level migration
simultaneously |
| Instant availability
and background initialization |
| Support S.M.A.R.T & NCQ & OOB Staggered Spin-Up capable drives |
| Automatic drive
insertion / removal detection and rebuilding |
| Two 4Gb FC-AL ( SFP) -
4Gbit per Loop |
| 16 of SATA –II channel
- 3.0Gbps per channel |
| LCD control panel for
setup, alarm mute and configuration |
| System status
indication through LCD, LED and alarm buzzer |
| All system events can
be sent to multiple user alerts via e-mails |
| Firmware-embedded SNMP
agent permits the remote to monitor all events
through LAN with no SNMP agent required |
| Two redundant,
hot-swappable cooling modules with self-regulating
speeds and wide range airflow design |
| Controlled by RAID
controller automatically maintaining optimal
ambient temperature |
| Redundant by dual 460W
power supplies with PFC, load-sharing type,
hot-swappable and cable-less design |
| AC Voltage 110-230 VAC
/AC Frequency 50-60Hz |
| Operating temperature:
5 to 35 degree C |
| Non-operating
temperature: -40 to 60 degree C |
| 20% to 80%
non-condensing |
| Dimensions: 446mm(W) x
520mm(D) x 3U |
| Weight (w/o HDDs):
20.0kg |
AL-7161F utilizes two 4Gb FC-AL as host
interface to connect SAN environments; the through-put can very fast. And new generation of SATA is utilized in
our design as the disk interface. Therefore, you can very
simply build a TB RAID with less compatible problems with
total 16 of SATA disk drives. Redundant and hot swappable
power supply modules and cooling fan systems can tolerate a
main failure without interrupting service. And web
configuration (on board Ethernet supported) brings you a most
convenient way to configure and monitor our RAID subsystems.
