iSCSI to SAS/SATA RAID

Alnico iSCSI array's cost-performance offers customers a better alternative and value that rivals FC SAN. Alnico 8161i / 8121i is not only capable of delivering outstanding performance up to 600MBps / 120K IOps in full-duplex mode, but also enables an optimized and cost-effective TCO (total cost of ownership) to be achieved by rapidly deploying IP SAN environments with existing GbE switches and the plentiful IP network that could be painlessly managed and maintained without further ado. Accompanied with hardware built-in snapshot function, Alnico iSCSI RAID can easily replicate several point-in-time data that could be instantly recovered at any time without interrupting production, the built-in snapshot function at the same time cuts down the licensing cost of backup software. With the excellence of cost-performance the Alnico iSCSI array possesses, customers could maximize their storage resource utilization and their TCO will be protected for the future.

 
AL-8121i
GbE iSCSI to SAS/SATA-II 2U/ 12-bay RAID subsystem
  • Quad-Port GbE iSCSI, supports link aggregation, fail-over, and load-balancing.
  • Built-in snapshot, volume backup and recovery become an easy task.
  • Support iSCSI Jumbo Frame, maximizing data transmission efficiency.
  • Multiple iSCSI target nodes support,
  • Support CHAP encryption and host access control for data protection
  • Support RAID levels: 0, 1, 3, 5, 0+1, 6,50, 60 and JBOD
  • Support CRC checksum for Header Digest and Data Digest, re-ensuring data integrity.
  • Management UI via serial console, SSH telnet, HTTP Web UI, and secured Web (HTTPS).
  • Battery backup module ready (Optional).
  • Redundant and hot-swappable power supply units and cooling fan systems can tolerate the failure without interrupting service

AL-8161i
GbE iSCSI to SAS/SATA-II 3U/16-bay RAID subsystem

  • Quad-Port GbE iSCSI, supports link aggregation, fail-over, and load-balancing.
  • Built-in snapshot, volume backup and recovery become an easy task.
  • Support iSCSI Jumbo Frame, maximizing data transmission efficiency.
  • Multiple iSCSI target nodes support,
  • Support CHAP encryption and host access control for data protection.
  • Support RAID levels: 0, 1, 3, 5, 0+1, 6,50, 60 and JBOD
  • Support CRC checksum for Header Digest and Data Digest, re-ensuring data integrity.
  • Management UI via serial console, SSH telnet, HTTP Web UI, and secured Web (HTTPS).
  • Battery backup module ready (Optional).
  • Redundant and hot-swappable power supply units and cooling fan systems can tolerate the failure without interrupting service

AL-8241iNew !
GbE iSCSI to SAS/SATA-II 4U/24-bay RAID subsystem

  • Quad-Port GbE iSCSI, supports link aggregation, fail-over, and load-balancing.
  • Built-in snapshot, volume backup and recovery become an easy task.
  • Support iSCSI Jumbo Frame, maximizing data transmission efficiency.
  • Multiple iSCSI target nodes support,
  • Support CHAP encryption and host access control for data protection.
  • Support RAID levels: 0, 1, 3, 5, 0+1, 6,50, 60 and JBOD
  • Support CRC checksum for Header Digest and Data Digest, re-ensuring data integrity.
  • Management UI via serial console, SSH telnet, HTTP Web UI, and secured Web (HTTPS).
  • Battery backup module ready (Optional).
  • Redundant and hot-swappable power supply units and cooling fan systems can tolerate the failure without interrupting service

AL-8241i-DNew !
Dual and Redundant Controller supported. GbE iSCSI to SAS 4U/24-bay RAID subsystem

  • Quad-Port GbE iSCSI per controller, supports link aggregation, fail-over, and load-balancing.
  • Built-in snapshot, volume backup and recovery become an easy task.
  • Support iSCSI Jumbo Frame, maximizing data transmission efficiency.
  • Multiple iSCSI target nodes support,
  • Support CHAP encryption and host access control for data protection.
  • Support RAID levels: 0, 1, 3, 5, 0+1, 6,50, 60 and JBOD
  • Support CRC checksum for Header Digest and Data Digest, re-ensuring data integrity.
  • Management UI via serial console, SSH telnet, HTTP Web UI, and secured Web (HTTPS).
  • Battery backup module ready (Optional).
  • Redundant and hot-swappable power supply units and cooling fan systems can tolerate the failure without interrupting service

AL-8241iANew !
10GbE iSCSI to SAS/SATA-II 4U/24-bay RAID subsystem

  • Dual-Port 10GbE iSCSI ( SFP), supports link aggregation, fail-over, and load-balancing.
  • Built-in snapshot, volume backup and recovery become an easy task.
  • Support iSCSI Jumbo Frame, maximizing data transmission efficiency.
  • Multiple iSCSI target nodes support,
  • Support CHAP encryption and host access control for data protection.
  • Support RAID levels: 0, 1, 3, 5, 0+1, 6,50, 60 and JBOD
  • Support CRC checksum for Header Digest and Data Digest, re-ensuring data integrity.
  • Management UI via serial console, SSH telnet, HTTP Web UI, and secured Web (HTTPS).
  • Battery backup module ready (Optional).
  • Redundant and hot-swappable power supply units and cooling fan systems can tolerate the failure without interrupting service

AL-8241iA-DNew !
Dual and Redundant Controller supported, 10GbE iSCSI to SAS 4U/24-bay RAID subsystem

  • Dual-Port 10GbE iSCSI (SFP) per controller, supports link aggregation, fail-over, and load-balancing.
  • Built-in snapshot, volume backup and recovery become an easy task.
  • Support iSCSI Jumbo Frame, maximizing data transmission efficiency.
  • Multiple iSCSI target nodes support,
  • Support CHAP encryption and host access control for data protection.
  • Support RAID levels: 0, 1, 3, 5, 0+1, 6,50, 60 and JBOD
  • Support CRC checksum for Header Digest and Data Digest, re-ensuring data integrity.
  • Management UI via serial console, SSH telnet, HTTP Web UI, and secured Web (HTTPS).
  • Battery backup module ready (Optional).
  • Redundant and hot-swappable power supply units and cooling fan systems can tolerate the failure without interrupting service

  Copyright | Contact us